Grease settling/Separation

I have about 2,000 gallons, but the oil is not settling and no separation of oil and sludge, it has been over 7 days now and the temp is about 40 degrees here. any suggestions ?? as i thought 3-4 days should have been sufficient.

Try adding a little bit of

Try adding a little bit of Acetic or hydrochloric acid (about 1/2 gallon to the whole 2,000 gallons) and give it a stir. That should help break the emulsion and settle the water.

I have a similar problem.

I have a similar problem. The acid sounds like a cheap/easy fix, how strong of acid? I'll try if first but also wonder are heat, pressure or centifuse good options as well?

Reply to this post

Image CAPTCHA
Enter the characters shown in the image.