"Transforming Waste Vegetable Oil Into Electricity & Hot Water
A Vegawatt system contains more than just power generation equipment. It includes a turn-key waste vegetable oil (WVO) refinery, automatically transforming the darkest, nastiest used cooking oil into fuel appropriate for power generation."
"We carry a wide range of products that have been tested and approved for use in converting diesel engines to be powered efficiently, safely, and economically using straight vegetable oil, used, or recycled waste vegetable oil! [...]
Have an Authorized VEGPOWER Dealer in your area install our conversion equipment into your diesel to start burning this locally abundant & ecological fuel source!
Our VEGPOWER Dealers will advise you on accesories & equipment that may be needed to ensure a safe running VEG system.
"Our Coach experts will locate, purchase, repair and convert a bus custom designed for you!
Professional, road tested experience brings you the most robust straight vegetable oil systems ever devised. Our systems have run thousands of miles on veggie from California to Costa Rica, to New York and back many times. Our simple design solves the unique challenges involved in collecting and filtering dirty fuel on the road. It can get messy if done incorrectly. We have refined this to a clean art of fuel acquisition. [...]
"The products that are offered below typically have a petroleum base. However, using a process similar to that of producing Bio diesel called esterification, we have produced a vegetable oil base for these products. These products have actually been produced from Waste Vegetable Oil collected from restaurants."
We are THE conversion center in the greater Montreal area. We are experienced diesel mechanics with expertise in Ford and VW. We can supply parts or complete kits for those who can do the conversion themselves or we can certainly do the conversion here at our shop. Anything from small generators to large CAT powerplants.
We also sell WVO dewatered and filtered to 2 microns for 1/2 price of the weekly going rate for diesel.
Contamination removed without a filter in 10 hours
"The centrifuge can handle maximum particle size of 500 micron at the input. The centrifuge nozzles are .045 inches/ 1.15 mm. However, for the safety of the pump, it is best if a suction filter of 100 micron is used.
Flow rate .93 GPM or 55 gallons per hour
Measures 4” Diameter by 6” Tall
Supplied Universal mounting plate is 3” wide x 4” long with a flange mount with two ½ holes and a 1” NPT female coupling for affixing the return line.
Rotor holding capacity: 10.5 oz of contamination.
The flow is the key. The centrifuge can only handle 55 GPH. You need a pump that will give you 90 PSI at 0.93 GPM / 55 GPH for ultimate performance. The minimum operating pressure is 35 PSI. The viscosity also enters into the equation, the thinner the better so heating the fuel to 140+ will also increase performance. Straight room temp vegetable oil may take some experimenting with."
"1 Micron Polypropylene filters and 5 Micron Polypropylene filters.
These are high quality 10 in long by 2 in diameter polypropylene filters. They fit most all 10-inch filter housings. These are great filters for your Reverse Osmosis water system, or your whole house 10-inch housing. People have started using these filters to filter vegetable oil for their Bio-Diesel filtering needs.